Nectre 15 Freestanding Wood Fire

Specifications

Installation

We recommend having a professional install any of our Nectre heaters. Our Dealers can arrange installation and most cases will undertake a site inspection to determine the correct location.

Product disclaimer

Pecan Engineering continually strives to improve the performance of all our Nectre heaters and stoves.We reserve the right to change or alter sizes and or specifications without notice. Efficiencies quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001

Heater Clearances

Installation clearance distances for the Nectre 15 are as follows:

• 175mm from rear of heater to wall in a standard installation (square to walls).
• 750mm from side of heater to wall in a standard installation (square to walls).
• 750mm from rear corner of heater to wall in corner installation.

Flue and Hearths

Nectre 15 is not supplied with a flue from the factory. Our Dealers all provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, our Dealers can supply a suitable hearth for your requirements.

Compliance

The Nectre 15 has been designed and manufactured to exceed the strict AS/NZS 4013 standards for emissions of 1.5g / kg of fuel burnt and efficiency of 60%.

FAQ

• Nectre 15 Installation manual
• Nectre 15 User manual
• Tips for burning wood
• Where can I buy a Nectre 15
• Contact us for more information

Radiant Heat

The Nectre 15 firebox, radiates heat towards furniture and objects around the living area. Radiant heat is excellent if you want to sit in front while watching the flame.

NATA Tested

The Nectre 15 has been tested and approved in a NATA accredited testing facility of Adelaide Heating Technology Pty Limited.